"drujinin" wrote:

No sense in buying it "cheap", then putting a ton of money into new wheels and hubs or axles! Better to wait and search for a better trailer!

i found a trailer just like i was looking for needs a lil work .the front axle is out of it
altho the guy has an axle and all the hardware to put it back in

10 ton tag along duels tandem deck over

ill get some pics up
can anyone identify the manufacture of this trailer


ill get some better pics i gota clean it up and get the other axle under it

all the dirt you see was trees and steep hills .the area with the semi trailer was all trees and was a ditch i filled in .
pic with the trucks in it is the hill in the video i posted a while back all cleaned up .

the pic with the loader and the house i did this week
moved the hill back some and dug out for a wall to be put in not in the pics ill get one when im finished
also pushed over a large cedar tree old girl was about 2 feet thick at the base

Good to see you got the bugs worked out!
Must be running to your satisfaction now as you sure seem to be giving it a good work out!
Keep having Fun!

"drujinin" wrote:

Good to see you got the bugs worked out!
Must be running to your satisfaction now as you sure seem to be giving it a good work out!
Keep having Fun!

it sure is man this machine has some power .

i have some more work lined up for it threw the winter
its awesome to see how it transforms the land

the more i operate it the more i want to use it

thanks all

all i have to upload ill get more of the finished project

a freind has this one he used it to clear 50 acers of forest then it just been sitting since then
big six cyl weighs 40k or there abouts
lowboy for sure

"CHARLESCAT933F" wrote:

a freind has this one he used it to clear 50 acers of forest then it just been sitting since then
big six cyl weighs 40k or there abouts
lowboy for sure

You better get it. Cat fever attacks will only go away with another fix. And an excuse to buy a low boy to. Even better.

"CHARLESCAT933F" wrote:

all i have to upload ill get more of the finished project

got these tires and wheels to replace the 16.5 truck tires that were wore out 2500lbs per tire

these are 19.5 225 45 3750lbs per tire
i had to machine out the center bore on the wheels from 4.56 to 4.88 inch 10 wheels took about 8 or 9 houres on afreinds mill heres some pics

You will like the 19.5 tires. Most are getting double the mileage on tires with them and more capicity to boot. I am converting my tandem gooseneck with 12,000 lb axles when the tires wear out to 19.5s also.

"old-iron-habit" wrote:

You will like the 19.5 tires. Most are getting double the mileage on tires with them and more capicity to boot. I am converting my tandem gooseneck with 12,000 lb axles when the tires wear out to 19.5s also.

thanks old iron .

i believe your right i have seen many a good trailer on the side of the road with blown out load range E truck tires
i have been preaching these tires and also 17.5 for some time

even with all 8 tires in good shape in the 16.5 are not heavy enough only 20k total for all 8
if i have a machine that weights 20k i have used up the total weight rating on the tires with the machine
thats not including the trailer weight itself

the 19.5 have a combined weight rating of 30k exceeding the trailer by 10k
i have been collecting these wheels for some time and was going to use them on my f250 with f350 running gear and a newly installed dana 70hd to fit the duels under the rear and a flatbed. ill have so source 4 more wheels now but i can find them on fleabay

i like to over build for built in safety and reliability durability .............................