acmoc

ACMOC Membership Benefits

  • FREE quarterly magazine filled with content about antique Caterpillar machines
  • FREE classified listings
  • ACMOC store discounts and specials
  • Full Bulletin Board Access
    • Marketplace (For Sale/Wanted)
    • Technical Library
    • Post attachments

$44 /year ELECTRONIC

$60 /year USA

$77 /year International

D4 hydraulic question

More
1 year 11 months ago #241057 by neil
Replied by neil on topic D4 hydraulic question
Todd, in case this is useful to you, we just recently fitted 100R16 hoses to my buddy's D4 Traxcavator, which uses a similar hydraulic control as yours does. The R16 hoses have a shorter radius capability than the R2 and although one spec shows the OD as slightly smaller, we haven't (yet) had any blow off. The clamp halves s are wound down until they touch. Hoses bought from discounthydraulics.com

Cheers,
Neil

Pittsford, NY

Please Log in or Create an account to join the conversation.

More
1 year 11 months ago #241058 by toddsmith23
Replied by toddsmith23 on topic D4 hydraulic question
Thanks! Found both on ebay

Please Log in or Create an account to join the conversation.

More
1 year 11 months ago #241059 by toddsmith23
Replied by toddsmith23 on topic D4 hydraulic question
Thanks Neil - I already bought the hose at my local hyd shop. However i do need hoses for my Case 320....

Do you happen to know what the working pressure is on the 7V hydraulic system?

Please Log in or Create an account to join the conversation.

More
1 year 11 months ago #241060 by josh
Replied by josh on topic D4 hydraulic question
Max recommended working pressure 1000 psi, relief valve set at 1200 psi.

Please Log in or Create an account to join the conversation.

Time to create page: 0.141 seconds
Go to top