-
Forum
-
Antique Caterpillar Machinery Owners Club
-
DISCUSSION
-
D4 2T steering clutch crank bearings
D4 2T steering clutch crank bearings
Less
More
-
Posts: 249
-
Thank you received: 104
-
4 years 2 months ago #220424
by Deebo
These bearings seem to be no longer available from CAT. Have they changed part number or is there a common bearing interchange number? I note these originals are RBC bearings but they don’t numbers on, just Made In USA RBC on the outer plates. I think with evaporust and grease they’ll function fine but I’ve found some NOS cranks 3B-0292 which if I use I‘d like new bearings for. Bearing part numbers are 3B-0568, with outer race 3B-0567. Or bearing assembly no. 3B-0569. Thanks.
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 595
-
Thank you received: 153
-
4 years 2 months ago #220426
by rax200
Hi Deebo,
The bearing number changes to 1B3756, the roller bearing number is 95416, as i am going through this too with my trans cover , ad OM said it is a poor system as they get no lubrication at all. I am looking at getting oil inpregnated bronze bushes to replace them as 8 are required.
Regards
Daryl
1937 RD4 4G4368
1940 D4 7J3717
1942 D4 7J9915SP
1942 R4 6G2550SP
1944 D4 2T6584SP
1945 D4 2T8978SP
1946 D4 5T6271
1956 D4 7U37855
1954 DH226 S/N 89 Howard Tug
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 315
-
Thank you received: 1
-
4 years 2 months ago #220428
by Chuck C
I did the same thing on my D2. I took the bearing to my local bearing house and they had matching bearings in stock.
Chuck C
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 5423
-
Thank you received: 620
-
-
Less
More
-
Posts: 249
-
Thank you received: 104
-
4 years 2 months ago #220436
by Deebo
Thanks guys that’s all really helpful. Does the CAT no. include the race or is it just the bearing? If not what’s the new part no. for the race. Regards,
Tony
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 595
-
Thank you received: 153
-
4 years 2 months ago #220437
by rax200
Hi Deebo,
I will get you some photos tomorrow of the bearings.
Regards
Daryl
1937 RD4 4G4368
1940 D4 7J3717
1942 D4 7J9915SP
1942 R4 6G2550SP
1944 D4 2T6584SP
1945 D4 2T8978SP
1946 D4 5T6271
1956 D4 7U37855
1954 DH226 S/N 89 Howard Tug
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 5423
-
Thank you received: 620
-
-
4 years 2 months ago #220442
by Rome K/G
Thanks guys that’s all really helpful. Does the CAT no. include the race or is it just the bearing? If not what’s the new part no. for the race. Regards,
Tony
No, race[outer] is 3H8363
Roller assembly is 1B3756
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 249
-
Thank you received: 104
-
4 years 2 months ago #220443
by Deebo
Great, thanks very much! Just wish there was a digital copy of an NPR somewhere!
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 4054
-
Thank you received: 341
-
Less
More
-
Posts: 6132
-
Thank you received: 409
-
4 years 2 months ago #220453
by neil
That's what I'm doing Eddie; anything you post I save. Once the new software is in place, I'll send a flash drive to IT and have them upload it all.
Cheers,
Neil
Pittsford, NY
Please Log in or Create an account to join the conversation.
-
Forum
-
Antique Caterpillar Machinery Owners Club
-
DISCUSSION
-
D4 2T steering clutch crank bearings
Time to create page: 0.184 seconds