-
Forum
-
Antique Caterpillar Machinery Owners Club
-
DISCUSSION
-
Big Gear Box
Big Gear Box
Less
More
-
Posts: 1742
-
Thank you received: 3
-
4 years 4 months ago #217592
by Oil Slick
I delivered a 40,000 lb gear reduction box to Canada. I’m learning to ask more key questions. The electric motor input speed of 1,750 and output of the two opposing rotating screws is 350 rpm. The gear reduction box turn two screws opposite directions to mix the plastic materials. The screws force the blended plastic out small holes and a cold knife cuts them off at 3/16. The cold knife cuts small pieces so it almost instantly hardens the plastic. This facility looks like a oil refinery. They make tons and tons of little plastic thats loaded into RR hopper cars. Didn’t ask what happened after that. Assume it’s put into some type of die press to make plastic goods.
D4e, these Michigan truckers are daily heavy haulers.
Headed to Dallas now with a low tolerance wood CNC machine that makes household furniture.
The forklift is in demand. They keep it very busy. It’s a 60-80 ton lift. They stack weights on the rear and it hydraulically extends out as needed. Steel plates were needed to keep it from sinking in the asphalt but no problem on concrete.
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 208
-
Thank you received: 0
-
4 years 4 months ago #217601
by Norm R2,22
In Mich. they are allowed 11 axles. I think the guy that wrote that law owned a tire store. I was helping at a farm near Flint. The rig I was driving had a 3 axle tractor, 5 axle trailer (two lift axles) and a 2 axle pup. Lots of fun going through town with that rig.
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 3628
-
Thank you received: 3
-
4 years 4 months ago #217608
by old-iron-habit
Where did you cross into Canada at? No problem with Weinie dog with the border shutdown to all but commercial traffic?
1937 Cat #11 tandem auto patrol,diesel, w/plow and wing, 6K506SP, 1937 RD 4 Ag Crawler RD5356, 1939 Cat 22 2F5429, 1952 Model 212 Grader 9T03427, 1953 2U D8 Dozer 2U20751, 1961 922A Rubber Tired Loader, 59A812, LeTouneau LS Cable Scraper, Cat/Lincoln 600 AMP Dual Welder, DW-21 Cat Scraper, DW-10 dump wagon/water wagon
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 1742
-
Thank you received: 3
-
4 years 4 months ago #217622
by Oil Slick
Norm, how much can they gross with 11 axles?
Rodger, Weenie kicked the bucket few years ago. Got little Chihuahua now. I crossed at Port Huron (above Detroit) I make the dog stay in the back and deny everything. She loves to ride on my Harley with me. She rides in my back pack.
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 5423
-
Thank you received: 620
-
-
Less
More
-
Posts: 208
-
Thank you received: 0
-
4 years 4 months ago #217633
by Norm R2,22
I seem to remember 154,000, but that was going to Ottawa Lake, Mich. and I think that was a bit over.
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 5551
-
Thank you received: 279
-
4 years 4 months ago #217651
by Deas Plant.
Hi, Oil Slick.
I dunno about elsewhere but we hadda 9-axle come into the ranch here with a load travelling entirely within CA. that was carrying 106,000#. And it was not all one piece. One part had to be taken off to get the height down but still came over in the same load. I do not know what the gross was.
Just my 0.02.
You have a wonderful day. Best wishes. Deas Plant.
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 1742
-
Thank you received: 3
-
4 years 4 months ago #217662
by Oil Slick
Rome, the old COE doesn’t look very powerful but with enough gear reduction seems like one drive axle would chew up tires pretty fast with that much weight.
Deas, did the ranch get a new play toy?
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 208
-
Thank you received: 0
-
Less
More
-
Posts: 5423
-
Thank you received: 620
-
-
4 years 4 months ago #217679
by Rome K/G
It's been said that the biggest hills in Mich. are overpasses.
There is some good grades going up to the UP, but not many big loads go up there.
Please Log in or Create an account to join the conversation.
-
Forum
-
Antique Caterpillar Machinery Owners Club
-
DISCUSSION
-
Big Gear Box
Time to create page: 0.179 seconds