- Posts: 4
- Thank you received: 3
ACMOC Membership Benefits
- FREE quarterly magazine filled with content about antique Caterpillar machines
- FREE classified listings
- ACMOC store discounts and specials
- Full Bulletin Board Access
- Marketplace (For Sale/Wanted)
- Technical Library
- Post attachments
$44 /year ELECTRONIC
$60 /year USA
$77 /year International
Turbo question for a d334
- Kenjeffery
-
Topic Author
- Offline
- New Boarder
- Member
Less
More
2 years 7 months ago #235758
by Kenjeffery
Turbo question for a d334 was created by Kenjeffery
This turbo is at an auction in oz, GP 4MD659 TO SIUT CAT D334, P/N 2P3907
Wanted to know if it could be fitted to a d330 engine, or is it to large, the d334 being a 6 cylinder engine.
Thanks
Wanted to know if it could be fitted to a d330 engine, or is it to large, the d334 being a 6 cylinder engine.
Thanks
Please Log in or Create an account to join the conversation.
- Deas Plant.
-
- Offline
- Platinum Boarder
- Member
Less
More
- Posts: 5551
- Thank you received: 279
2 years 7 months ago #235773
by Deas Plant.
You have a wonderful day. Best wishes. Deas Plant.
Replied by Deas Plant. on topic Turbo question for a d334
Hi, Kenjeffery.
Turbos need to pretty closely matched to the engine on which they are fitted. If there is not enough exhaust gas coming out of the engine to drive the turbo, you will not get full boost. You may get some boost - - - - or you may be worse off if the impeller is not being driven fast enough to get sufficient air into the engine.
Just my 0.02.
Turbos need to pretty closely matched to the engine on which they are fitted. If there is not enough exhaust gas coming out of the engine to drive the turbo, you will not get full boost. You may get some boost - - - - or you may be worse off if the impeller is not being driven fast enough to get sufficient air into the engine.
Just my 0.02.
You have a wonderful day. Best wishes. Deas Plant.
Please Log in or Create an account to join the conversation.
- Old Magnet
-
- Offline
- Platinum Boarder
- Member
Less
More
- Posts: 16175
- Thank you received: 504
2 years 7 months ago #235792
by Old Magnet
Replied by Old Magnet on topic Turbo question for a d334
Never heard of a D334, there's D333's and D434's but I don't see any listing for a D334.
The following user(s) said Thank You: Fat Dan
Please Log in or Create an account to join the conversation.
2 years 7 months ago #235795
by neil
Cheers,
Neil
Pittsford, NY
Replied by neil on topic Turbo question for a d334
There's a D334 genset here in Rochester. Looks to be of 70s vintage. Don't know much about them
Cheers,
Neil
Pittsford, NY
The following user(s) said Thank You: Fat Dan
Please Log in or Create an account to join the conversation.
- Old Magnet
-
- Offline
- Platinum Boarder
- Member
Less
More
- Posts: 16175
- Thank you received: 504
2 years 7 months ago #235798
by Old Magnet
Replied by Old Magnet on topic Turbo question for a d334
OK, had to get out the big book of rack setting charts.
There is a D334 92Bxxxx Industrial Engine and a 93Bxxxx Marine engine.
Both turbo-charged and aftercooled.
There is a D334 92Bxxxx Industrial Engine and a 93Bxxxx Marine engine.
Both turbo-charged and aftercooled.
The following user(s) said Thank You: Fat Dan
Please Log in or Create an account to join the conversation.
- Kenjeffery
-
Topic Author
- Offline
- New Boarder
- Member
Less
More
- Posts: 4
- Thank you received: 3
2 years 7 months ago #235808
by Kenjeffery
Replied by Kenjeffery on topic Turbo question for a d334
Thanks for the input,
thought it would be a long shot, but I don't think it will sell for much, and being full reco, might have been worth buying for the sake of it.
There is a good block for a d4 6u in the auction if anyone in Australia wants it.
thought it would be a long shot, but I don't think it will sell for much, and being full reco, might have been worth buying for the sake of it.
There is a good block for a d4 6u in the auction if anyone in Australia wants it.
The following user(s) said Thank You: Fat Dan
Please Log in or Create an account to join the conversation.
Time to create page: 0.146 seconds
ACMOC
Antique Caterpillar Machinery Owners Club
P.O. Box 9301
Peoria, IL 61612
(309) 691-5002
cat@acmoc.org
Become a Member!
"I became a member recently because the wealth of knowledge here is priceless."
- Chris R
"I also joined a year ago. had been on here a couple of times as a non-member and found the info very helpful so I got a one year subscription (not very expensive at all) to try it out. I really like all the resources on here so I just got a three year. I think its a very small price for what you can get out of this site."
- Jason N