acmoc

ACMOC Membership Benefits

  • FREE quarterly magazine filled with content about antique Caterpillar machines
  • FREE classified listings
  • ACMOC store discounts and specials
  • Full Bulletin Board Access
    • Marketplace (For Sale/Wanted)
    • Technical Library
    • Post attachments

$44 /year ELECTRONIC

$60 /year USA

$77 /year International

D2 Upper Rollers

More
2 years 10 months ago #232738 by Cat Yellow1
D2 Upper Rollers was created by Cat Yellow1
My D2 (4U1826) is missing the upper rollers.  Were these likely removed by a previous owner or were some units built without them?

Please Log in or Create an account to join the conversation.

More
2 years 10 months ago #232739 by Busso20
Replied by Busso20 on topic D2 Upper Rollers
my 1938 3J 1920 D2 has no load rollers on it, 4 track rollers only, check for mounts you will know then if factory fitted or not.

Please Log in or Create an account to join the conversation.

More
2 years 10 months ago #232740 by GrantJ
Replied by GrantJ on topic D2 Upper Rollers
I have read that they were an option. I have a D2 with them and one without them. Since D2s seem to last forever, I doubt that they make a lot of difference, but it makes the machine look better. (IMHO) Grant.

Please Log in or Create an account to join the conversation.

More
2 years 10 months ago #232742 by gauntjoh
Replied by gauntjoh on topic D2 Upper Rollers
Top rollers on D2s are very rare here in the UK.
They were an optional extra and presumably due to WW2 shortages very few if any arrived on these shores with top rollers.

John Gaunt, ACMOC President and Director, UK

Please Log in or Create an account to join the conversation.

More
2 years 10 months ago #232764 by Cat Yellow1
Replied by Cat Yellow1 on topic D2 Upper Rollers
Thanks everyone. Sounds like this might have never had one.

Please Log in or Create an account to join the conversation.

More
2 years 10 months ago #232766 by josh
Replied by josh on topic D2 Upper Rollers
On the early 4U D2s the track carrier roller was an option, the later 4Us it was standard, I have an early one that has the upper roller 4U1098SPG, maybe that is what the SPG is for.
The following user(s) said Thank You: Cat Yellow1

Please Log in or Create an account to join the conversation.

More
2 years 10 months ago #232768 by Old Magnet
Replied by Old Magnet on topic D2 Upper Rollers
Added track weight is a consideration.....

 
Attachments:
The following user(s) said Thank You: kracked1, Cat Yellow1, Busso20, steve_s

Please Log in or Create an account to join the conversation.

Time to create page: 0.175 seconds
Go to top