D47U trans bearing

kracked1
Topic Author
Offline
Platinum Boarder
Member

3 years 2 months ago #229687 by kracked1

D47U trans bearing was created by kracked1

I have a D4 7U8869. The front bearing is starting to make a little noise. Is it possible to change that thru the clutch inspection hole in the top of the bell housing? Or do I have to pull the top cover off the transmission? I looked at the book and it shows how to get it apart. Just not if you can do it without pulling the top cover.

Please Log in or Create an account to join the conversation.

Rome K/G
Offline
Platinum Boarder
Member

3 years 2 months ago #229688 by Rome K/G

Replied by Rome K/G on topic D47U trans bearing

The cover will have to come off to get in there.

The following user(s) said Thank You: kracked1

Please Log in or Create an account to join the conversation.

kracked1
Topic Author
Offline
Platinum Boarder
Member

3 years 2 months ago #229690 by kracked1

Replied by kracked1 on topic D47U trans bearing

Thank you. I was hoping not to have to pull it. But if I do I do.

Please Log in or Create an account to join the conversation.

rax200
Offline
Platinum Boarder
Member

3 years 2 months ago #229698 by rax200

Replied by rax200 on topic D47U trans bearing

Hi kracked1,The noisey bearings in the box could be the one inside the front input shaft, there are only five bearings in the box if you go in to do one you might as well do all of them.

I have done several boxes now and for a few hundred dollars It is good insurance.
You will require the following
2 x 6308
1 x 6313
1 x 6309
1 x AB1307
1 X M1307TV

Plus gaskets

Regards

Daryl

1937 RD4 4G4368
1940 D4 7J3717
1942 D4 7J9915SP
1942 R4 6G2550SP
1944 D4 2T6584SP
1945 D4 2T8978SP
1946 D4 5T6271
1956 D4 7U37855
1954 DH226 S/N 89 Howard Tug

Please Log in or Create an account to join the conversation.

kracked1
Topic Author
Offline
Platinum Boarder
Member

3 years 2 months ago #229732 by kracked1

Replied by kracked1 on topic D47U trans bearing

Rax 200 thank you much. It looks like a winter project.

Please Log in or Create an account to join the conversation.

ACMOC

Antique Caterpillar Machinery Owners Club

P.O. Box 9301
Peoria, IL 61612

(309) 691-5002
cat@acmoc.org

Chapters History Events Members Contact

Member Quick Links:

Store Forum

Become a Member!

"I became a member recently because the wealth of knowledge here is priceless."
- Chris R

"I also joined a year ago. had been on here a couple of times as a non-member and found the info very helpful so I got a one year subscription (not very expensive at all) to try it out. I really like all the resources on here so I just got a three year. I think its a very small price for what you can get out of this site."
- Jason N

ACMOC Membership Benefits

$44 /year ELECTRONIC

$60 /year USA

$77 /year International

D47U trans bearing

Attachments:

ACMOC