acmoc

ACMOC Membership Benefits

  • FREE quarterly magazine filled with content about antique Caterpillar machines
  • FREE classified listings
  • ACMOC store discounts and specials
  • Full Bulletin Board Access
    • Marketplace (For Sale/Wanted)
    • Technical Library
    • Post attachments

$44 /year ELECTRONIC

$60 /year USA

$77 /year International

Twenty two brake relining

More
3 years 10 months ago #223391 by cowdownman
Can one replace the brake linings on a Twenty two without stripping the final drives?

Please Log in or Create an account to join the conversation.

More
3 years 10 months ago #223411 by 3J1Bill
Replied by 3J1Bill on topic Twenty two brake relining
I did replace the left brake band on a CAT 22 thru the brake adjustment hole. I only did it once to see if it could be done. I have since replaced all others by removing all the parts including the final drive. Bill

Please Log in or Create an account to join the conversation.

More
3 years 10 months ago #223412 by hfdzl
Replied by hfdzl on topic Twenty two brake relining
That's one thing Cat could have done better.on these smaller tractors.

R2 5E3562 SP U.S.A. W.9151
R2 5E3563 SP U.S.A. W.9152

Please Log in or Create an account to join the conversation.

More
3 years 10 months ago #223446 by 3J1Bill
Replied by 3J1Bill on topic Twenty two brake relining
This is how I did it. The problem I had was removing the brake lever pin. I had to burn the brake lever pin out. I saved a lot of time and work. Done in one day with no help. This was on a tractor I needed to repair fast. When these instructions were written they didn't realize that pin has a semi press blind fit. Bill
Attachments:
The following user(s) said Thank You: hfdzl

Please Log in or Create an account to join the conversation.

More
3 years 10 months ago #223452 by hfdzl
Replied by hfdzl on topic Twenty two brake relining
Bill, thanks for the scan of the 15 service manual. Nice to see these earlier books for reference!

R2 5E3562 SP U.S.A. W.9151
R2 5E3563 SP U.S.A. W.9152

Please Log in or Create an account to join the conversation.

Time to create page: 0.148 seconds
Go to top