- Posts: 25
- Thank you received: 0
ACMOC Membership Benefits
- FREE quarterly magazine filled with content about antique Caterpillar machines
- FREE classified listings
- ACMOC store discounts and specials
- Full Bulletin Board Access
- Marketplace (For Sale/Wanted)
- Technical Library
- Post attachments
$44 /year ELECTRONIC
$60 /year USA
$77 /year International
- Forum
- Antique Caterpillar Machinery Owners Club
- DISCUSSION
- Cat. D6E hydraulic C-frame lift cylinder control valve leak.
Cat. D6E hydraulic C-frame lift cylinder control valve leak.
4 years 2 months ago #219598
by Pecanman
Replied by Pecanman on topic Cat. D6E hydraulic C-frame lift cylinder control valve leak.
Thank you for your response and phone number.
The plug was in the cavity when I opened it up on a previous occasion. After you sent the parts breakdown I ordered the seal (o-ring) from caterpillar. Now the plug is not in the cavity and I don't have a clue where it may have move to.
I will order a new plug and install it with the new seal.
Thank you for the help.
The plug was in the cavity when I opened it up on a previous occasion. After you sent the parts breakdown I ordered the seal (o-ring) from caterpillar. Now the plug is not in the cavity and I don't have a clue where it may have move to.
I will order a new plug and install it with the new seal.
Thank you for the help.
Please Log in or Create an account to join the conversation.
4 years 2 months ago #219608
by Rome K/G
Replied by Rome K/G on topic Cat. D6E hydraulic C-frame lift cylinder control valve leak.
Possibility it got shoved in farther? Stuck on the cover? Installed it, pressure built up, popped it out and fell in belly pan before you got the cover on? The cover on yours looks like it has a dimple in the middle on the outside, maybe different than what the parts book shows?
Please Log in or Create an account to join the conversation.
4 years 2 months ago #219611
by Pecanman
Replied by Pecanman on topic Cat. D6E hydraulic C-frame lift cylinder control valve leak.
Thank you for the input. I will look in belly pan to see if plug fell out as you indicated.
Will keep you updated next week.
Have a safe and great weekend.
Will keep you updated next week.
Have a safe and great weekend.
Please Log in or Create an account to join the conversation.
4 years 2 months ago #219620
by Rome K/G
Replied by Rome K/G on topic Cat. D6E hydraulic C-frame lift cylinder control valve leak.
Thanks! you too!
Gary
Gary
Please Log in or Create an account to join the conversation.
4 years 2 months ago #219636
by Pecanman
Replied by Pecanman on topic Cat. D6E hydraulic C-frame lift cylinder control valve leak.
Took your advise and went under dozer to rear belly pan, didn't find the plug. We had rain the last five days, when it dries up I will spend more time looking for plug.
Again, thanks for advise.
Again, thanks for advise.
Please Log in or Create an account to join the conversation.
4 years 2 months ago #219637
by Rome K/G
Replied by Rome K/G on topic Cat. D6E hydraulic C-frame lift cylinder control valve leak.
No problem, maybe less trouble to just buy the new one.
Please Log in or Create an account to join the conversation.
4 years 2 months ago #219758
by Pecanman
Replied by Pecanman on topic Cat. D6E hydraulic C-frame lift cylinder control valve leak.
IHM used parts does not have plug. Parts person tried other sources and reports plug is obsolete.
Any other suggestions or thoughts?
Thanks for any suggestions.
Any other suggestions or thoughts?
Thanks for any suggestions.
Please Log in or Create an account to join the conversation.
4 years 2 months ago #219773
by ccjersey
D2-5J's, D6-9U's, D318 and D333 power units, 12E-99E grader, 922B & 944A wheel loaders, D330C generator set, DW20 water tanker and a bunch of Jersey cows to take care of in my spare time:D
Replied by ccjersey on topic Cat. D6E hydraulic C-frame lift cylinder control valve leak.
Looks like it wouldn’t be hard to make one.
D2-5J's, D6-9U's, D318 and D333 power units, 12E-99E grader, 922B & 944A wheel loaders, D330C generator set, DW20 water tanker and a bunch of Jersey cows to take care of in my spare time:D
Please Log in or Create an account to join the conversation.
4 years 2 months ago #219785
by Rome K/G
Talk to john at General gear and tractor 208-342-8911 ,maybe he can send you the whole relief valve or the plug if he has a 173B unit there. Might not be hard to have made also.
Replied by Rome K/G on topic Cat. D6E hydraulic C-frame lift cylinder control valve leak.
IHM used parts does not have plug. Parts person tried other sources and reports plug is obsolete.
Any other suggestions or thoughts?
Thanks for any suggestions.
Talk to john at General gear and tractor 208-342-8911 ,maybe he can send you the whole relief valve or the plug if he has a 173B unit there. Might not be hard to have made also.
Please Log in or Create an account to join the conversation.
- Forum
- Antique Caterpillar Machinery Owners Club
- DISCUSSION
- Cat. D6E hydraulic C-frame lift cylinder control valve leak.
Time to create page: 0.163 seconds
ACMOC
Antique Caterpillar Machinery Owners Club
P.O. Box 9301
Peoria, IL 61612
(309) 691-5002
cat@acmoc.org
Become a Member!
"I became a member recently because the wealth of knowledge here is priceless."
- Chris R
"I also joined a year ago. had been on here a couple of times as a non-member and found the info very helpful so I got a one year subscription (not very expensive at all) to try it out. I really like all the resources on here so I just got a three year. I think its a very small price for what you can get out of this site."
- Jason N