- Posts: 160
- Thank you received: 21
ACMOC Membership Benefits
- FREE quarterly magazine filled with content about antique Caterpillar machines
- FREE classified listings
- ACMOC store discounts and specials
- Full Bulletin Board Access
- Marketplace (For Sale/Wanted)
- Technical Library
- Post attachments
$44 /year ELECTRONIC
$60 /year USA
$77 /year International
REPLACEMENT HOSE 1956 d4 7u
4 years 5 months ago #215351
by Elton
REPLACEMENT HOSE 1956 d4 7u was created by Elton
Good afternoon! Are there any suggestions as to what hose to use as a replacement hydraulic hose for my D4? The existing hose pushes on the tube nipple and is secured with a bolted on clamp. Something that looks right would be a bonus too! Thank you for your suggestions. Elton
Please Log in or Create an account to join the conversation.
4 years 5 months ago #215353
by ccjersey
D2-5J's, D6-9U's, D318 and D333 power units, 12E-99E grader, 922B & 944A wheel loaders, D330C generator set, DW20 water tanker and a bunch of Jersey cows to take care of in my spare time:D
Replied by ccjersey on topic REPLACEMENT HOSE 1956 d4 7u
Any 2 wire #12 (3/4”) hydraulic hose will work just fine. The standard hose is designated SAE100R2 and is interchangeable across manufacturers. The Anchor style two bolt clamps are original and adequate for the pressures developed by the hydraulic system. I don’t know if you can still buy them new though. Haven’t tried to find any, just reuse the old ones with new bolts as necessary.
D2-5J's, D6-9U's, D318 and D333 power units, 12E-99E grader, 922B & 944A wheel loaders, D330C generator set, DW20 water tanker and a bunch of Jersey cows to take care of in my spare time:D
Please Log in or Create an account to join the conversation.
4 years 5 months ago #215360
by bursitis
Replied by bursitis on topic REPLACEMENT HOSE 1956 d4 7u
i just recently used these folks. very fast service.
www.discounthydraulichose.com/made-to-order-assemblies.html
look for 3/4 inch two wire.
look for 3/4 inch two wire.
Please Log in or Create an account to join the conversation.
4 years 5 months ago #215363
by neil
Cheers,
Neil
Pittsford, NY
Replied by neil on topic REPLACEMENT HOSE 1956 d4 7u
Cheers,
Neil
Pittsford, NY
Please Log in or Create an account to join the conversation.
4 years 5 months ago #215390
by Elton
Replied by Elton on topic REPLACEMENT HOSE 1956 d4 7u
Thank you all for your help! Elton
Please Log in or Create an account to join the conversation.
4 years 5 months ago #215409
by STEPHEN
Replied by STEPHEN on topic REPLACEMENT HOSE 1956 d4 7u
The farm uses clamps very similar to the Anchor style on the wind machine propane hoses, source unknown.
Please Log in or Create an account to join the conversation.
Time to create page: 0.139 seconds
ACMOC
Antique Caterpillar Machinery Owners Club
P.O. Box 9301
Peoria, IL 61612
(309) 691-5002
cat@acmoc.org
Become a Member!
"I became a member recently because the wealth of knowledge here is priceless."
- Chris R
"I also joined a year ago. had been on here a couple of times as a non-member and found the info very helpful so I got a one year subscription (not very expensive at all) to try it out. I really like all the resources on here so I just got a three year. I think its a very small price for what you can get out of this site."
- Jason N